AOR GT-1 Galvanic Isolation Transformer

Description

AOR GT-1 Galvanic Isolation Transformer
Description
・ For those who are worried about galvanic isolation transformer noise! Effective for suppressing reception noise!-By installing it between the receiver and the antenna, it is an isolation transformer dedicated to reception that attenuates artificial reception noise and improves the reception condition.-It is effective for receivers controlled by a PC such as Perseus receivers and receivers using switching power supplies.-Ideal for receiving VLF, LF, and MF bands. It can be used in the entire 40kHz to 30MHz band.-Since the antenna and receiver are electrically isolated, the receiver can be protected from static electricity induced in the antenna.● How to use GT-1 is very easy to use. Connect the cable from the antenna to the BNC plug on the RX display side to the antenna input of the receiver, and to the BNC jack on the side displayed as ANT. If necessary, connect the conversion adapter or receiver to the GT-1 with a short coaxial cable of about 10 to 20 cm. GT-1 is an isolation transformer that reduces the influence of noise by blocking the noise caused by the ground loop. It has no effect on noise caused by causes other than the ground loop and external noise that jumps directly into the antenna. If you are using a notebook PC and you see noise reduction when using it with batteries, you can expect the noise attenuation effect of GT-1. ● Function: Isolation transformer ● Frequency range: 40kHz to 30MHz ● Insertion loss: Maximum 3dB ● Input / output impedance: 50Ω unbalanced ● Connector shape: BNC-P (receiver side): BNC-J (antenna side) ● External dimensions (external dimensions) (Excluding connector): 34.5x50x25mm ● Weight: Approximately 50g GT-1 is for reception only. It cannot be used for sending.
Payment
Please pay within 2 days after the auction closed.
Shipping
EMS only
International Buyers - Please Note:
* Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
* Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.
* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
Provided by HARU