Tanks Inc 51-CGX 1949-1952 Chevrolet Car Steel Fuel Tank

Description

It is also painted for additional protection, Comes with a large 3/8" NPT Internal Pickup Tube, Specifically designed to fit the 1949-1952 Chevy, Features an alloy coated steel construction to protect against corrosion, Includes a 1-1/2" ID mandrel formed fuel-proof connecting hose for easy installation
Tanks Inc 51-CGX 1949-1952 Chevrolet Car Steel Fuel Tank
Sku # 910760811
Mfr. Part # 51-CGX
Condition
New
Brand
Tanks
Sold
Each
Details
Info
This 18 gallon fuel tank kit from Tanks Inc. features a large 3/8" NPT pickup tube. It is compatible with your 1949-1952 Chevy car. It includes mounting straps, gaskets, and O-ring sealed screws.
Alloy Coated Steel to protect against corrosion
Painted for additional protection
Internal Baffles
Large 3/8" NPT Internal Pickup Tube
1" deeper for extra capacity
Block-Off plate for non fuel injected cars
1-1/2" ID Mandrel formed fuel-proof connecting hose for easy installation
Accept any 5 bolt after market sender such as Classic, Stewart Warner, VDO, Autometer, etc
Includes mounting straps, gaskets & O-ring sealed screws
51-CGX (18 Gallons)
Note:
When using the 51-CGX tank with a GPA series pump a 3/8" NPT pipe plug will be needed to block off the internal fuel tank pickup tube.
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Steel
Sold in Quantity
Each
Finish
Painted
Color
Silver
Hardware Included
Yes
Fuel Pump Included
No
Sending Unit Included
No
Overall Height
9.25
Overall Width
21.25
Overall Length
29.25
Capacity
18
MFG. Part #
51-CGX
Inlet Fitting
3/8" NPT
Fuel System Type
EFI | Carb
Fuel Tank Style
Custom Replacement
Fuel Capacity Range
15.00-19.99 Gallons
Reviews
I now know where to go when I need another tank!
Rated
by Rambler Man on May 03, 2021
Summary:
I purchased this for my 61 Rambler American and it is so close to the factory one that I will not have to do any modifications to make it fit.
Yes, I recommend this product.
Perfect replacement for the original.
Rated
by Loners CC on December 25, 2020
Summary:
Great product. Perfect replacement for the production tank.
Yes, I recommend this product.
very good tank, extra capacity too.
Rated
by ken on August 28, 2020
Summary:
fits the 52 chevy perfectly...will be a custom rat
Yes, I recommend this product.
Product met expectations
Rated
by Chuck on August 07, 2020
Summary:
Installed in my 1952 Styleline Chevy. Had all the parts to complete the job. I had to modify sending unit to fit tank bolt pattern, bend the straps and add an additional brass fitting.
Yes, I recommend this product.
Fuel tank
Rated
by Lou on January 08, 2020
Summary:
Looks good. Didn't install yet,I don't anticipate any problems.
Pros:
Fuel injection ready.
Yes, I recommend this product.
Related Items / Suggested Parts
Classic Instruments SN35 Fuel Level Sender, 240/33 Ohm, 6-24 Inch
Tanks GPA-4 In-Tank Fuel Pump Module, GPA Series, 100 Psi
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.